✓ Licensed & Insured
24/7 Emergency: 778-909-5731

Complete Pricing Guide

Combi Boiler Installation Cost Vancouver 2026

Licensed & Insured Gas-Certified Technicians Serving Vancouver Since 1999

How much does a combi boiler cost in Vancouver? In 2026, a complete combi boiler replacement in Metro Vancouver ranges from $6,500 to $14,000 installed — depending on the brand, model, home size, and installation complexity. A new installation (where no boiler existed before) ranges from $9,000 to $18,000 due to additional gas line, venting, and plumbing work.

This guide breaks down every cost factor: equipment, labor, permits, gas work, venting, system flushing, thermostat, and rebates. Prices are based on actual 2026 quotes from licensed TSSA/BC gas-certified installers serving Vancouver, Burnaby, Surrey, Richmond, and all of Greater Vancouver.

Combi Boiler Installation Cost by Brand — 2026

Brand choice is the single biggest factor in your total cost. Here are actual installed price ranges for popular brands in Vancouver — including the boiler unit, installation labor, permits, and GST:

  • Navien NCB-H (entry-level): $6,500 – $8,500 installed
  • Navien NCB-E (premium, built-in recirculation): $8,000 – $10,500 installed
  • Viessmann Vitodens 100-W (mid-range): $8,500 – $11,000 installed
  • Viessmann Vitodens 200-W (premium): $10,500 – $14,000 installed
  • Bosch Greenstar 151 (entry-mid): $7,500 – $9,500 installed
  • Bosch Greenstar 100 Combi: $7,000 – $9,000 installed
  • Rinnai I-Series (mid-range): $7,500 – $10,000 installed
  • Rinnai M-Series (budget): $6,500 – $8,000 installed
  • Baxi Luna HT (budget): $6,500 – $8,500 installed
  • Lochinvar Noble (premium): $9,500 – $13,500 installed
  • Weil-McLain Evergreen: $8,000 – $11,000 installed
  • IBC SL Series (Canadian-made): $8,500 – $11,500 installed

What's Included in the Installation Price

When you get a quote for combi boiler installation, make sure it includes everything. Some contractors quote a low price but exclude permits, gas work, or system flushing — then surprise you with extra charges. Here's what a complete installation should include:

  • New combi boiler unit (all manufacturers require authorized dealer purchase for warranty)
  • Removal and disposal of old boiler and hot water tank
  • Gas line connection and gas pressure testing
  • New venting — typically concentric PVC through wall or roof
  • Condensate drain line to floor drain or sump pump
  • System power flush to remove sludge before installing new boiler
  • New magnetic filter (e.g., Fernox TF1 or similar)
  • System inhibitor dosing after flush
  • Building permit ($150–$300 depending on municipality)
  • City of Vancouver / municipal gas inspection fee
  • Startup, commissioning, and combustion analysis
  • Manufacturer warranty registration
  • 1-year labor warranty (standard)

Installation vs Replacement Cost

The distinction between a new installation and a replacement matters for pricing:

  • Replacement (swap old boiler for new combi): $6,500 – $14,000 — assumes existing gas line, venting route, and adequate gas meter capacity
  • New installation (no boiler previously): $9,000 – $18,000 — requires new gas line from meter, new venting through wall/roof, new condensate drain, and possibly a gas meter upgrade if current meter is undersized
  • Boiler + hot water tank replacement with combi: $7,000 – $12,000 — removes the tank and boiler, installs one combi unit. Most common Vancouver scenario
  • High-rise condo replacement: $5,500 – $9,000 — simpler due to existing venting common stack and standard gas pressure. Strata approval may be required
  • Heritage home conversion (Vancouver Special, Kitsilano character home): $9,000 – $16,000 — often requires new gas line, complex venting routes, and system configuration changes

Additional Costs to Budget For

These items may or may not be included in your quote — always ask:

  • Gas meter upgrade (if current meter is undersized): $500 – $1,200 (FortisBC handles this)
  • New thermostat (smart thermostat like Nest or Bosch EasyControl): $200 – $400
  • Radiator TRV replacement (if existing TRVs are seized): $35 – $80 per radiator
  • Asbestos abatement (if your 1970s-era boiler room has asbestos insulation): $500 – $3,000+
  • Water softener or scale protection (if you have hard water): $500 – $1,200
  • Outdoor reset sensor (improves efficiency 5-10%): $150 – $300
  • Extended labor warranty (beyond 1 year): $200 – $500 per additional year

How Rebates Reduce Your Cost

FortisBC and CleanBC offer rebates for high-efficiency combi boiler installations. In 2026, qualifying installations can receive $1,000 to $3,000 in combined rebates — effectively reducing your installation cost by 10-25%.

Rebates are not automatic. They require pre-approval in some cases, specific efficiency ratings (typically ≥95% AFUE), professional installation by a licensed gas fitter, and post-installation inspection. We handle all rebate paperwork for our customers.

This is not a DIY repair

Combi boilers are gas-fired appliances regulated under the BC Safety Standards Act. Opening the unit, touching the gas valve, or working on the flue without a valid BC gas-fitter licence is both unsafe and illegal. Diagnosing the fault is helpful — fixing it should always be left to a certified technician.

Call 778-909-5731

Frequently Asked Questions

Get a Fixed Written Quote

We'll assess your home and provide a detailed, no-obligation quote — no surprises, no pressure.

Call Now - 778-909-5731