Viessmann Error Code
Viessmann Error Code F1
Flow temperature sensor short circuit.
If your Viessmann combi boiler is showing error code F1, here's what it means: Flow temperature sensor short circuit. This is a moderate fault. The boiler may keep running intermittently, but it should be diagnosed soon to prevent further damage.
Viessmann boilers report faults using f-series and e-series codes (e.g. f2, ea). Knowing the code helps a technician arrive prepared with the right parts, which usually means a faster, lower-cost repair.
What causes the F1 code?
Error F1 on a Viessmann boiler is most commonly caused by one of the following:
- Sensor short
- Damaged wiring
What you can safely check first
- Note the exact code and your boiler's model number
- Check the pressure gauge — low pressure triggers many faults
- Confirm the gas supply is on and other gas appliances work
- Reset the boiler once, per the manual, only if it's safe to do so
- If the code returns, stop and call a licensed technician
Why this needs a licensed technician
Resolving a F1 fault almost always involves the gas, combustion, sensor or pressurized side of the appliance. Under BC's Safety Standards Act, that work must be performed by a licensed gas fitter — and doing it correctly protects your warranty and your safety. We diagnose Viessmann boilers, carry common parts, and verify clean combustion before returning your boiler to service.
This is not a DIY repair
Combi boilers are gas-fired appliances regulated under the BC Safety Standards Act. Opening the unit, touching the gas valve, or working on the flue without a valid BC gas-fitter licence is both unsafe and illegal. Diagnosing the fault is helpful — fixing it should always be left to a certified technician.
Call 778-909-5731Frequently Asked Questions
Other Viessmann codes & help
Fix Your Viessmann F1 Fault
Free, no-obligation quotes across Greater Vancouver. CombiBoiler.ca — A division of ROMA Heating Ltd..