If your Baxi combi boiler is showing error code E80, here's what it means: External/return sensor fault. This is a low-urgency fault. It usually doesn't stop heating or hot water, but it's worth addressing at your next service.
Baxi boilers report faults using e-series codes (e.g. e110, e133). Knowing the code helps a technician arrive prepared with the right parts, which usually means a faster, lower-cost repair.
What causes the E80 code?
Error E80 on a Baxi boiler is most commonly caused by one of the following:
- Sensor failure
- Wiring
What you can safely check first
- Note the exact code and your boiler's model number
- Check the pressure gauge — low pressure triggers many faults
- Confirm the gas supply is on and other gas appliances work
- Reset the boiler once, per the manual, only if it's safe to do so
- If the code returns, stop and call a licensed technician
Why this needs a licensed technician
Resolving a E80 fault almost always involves the gas, combustion, sensor or pressurized side of the appliance. Under BC's Safety Standards Act, that work must be performed by a licensed gas fitter — and doing it correctly protects your warranty and your safety. We diagnose Baxi boilers, carry common parts, and verify clean combustion before returning your boiler to service.
This is not a DIY repair
Combi boilers are gas-fired appliances regulated under the BC Safety Standards Act. Opening the unit, touching the gas valve, or working on the flue without a valid BC gas-fitter licence is both unsafe and illegal. Diagnosing the fault is helpful — fixing it should always be left to a certified technician.
Call 778-909-5731Frequently Asked Questions
Fix Your Baxi E80 Fault
Free, no-obligation quotes across Greater Vancouver. CombiBoiler.ca — A division of ROMA Heating Ltd..